G2: Service Manuals And TSBs: Web Manual: FSM: Section 1: Lift And Support Points

From LegendWiki

Jump to: navigation, search

Note: Text in red indicate notes that are not found in the original service manual from Helm, but are added here for additional help or clarifications.

Contents

Lift

  1. Place the lift blocks as shown.
  2. Raise the hoist a few inches and rock the car to be sure it is firmly supported.
  3. Raise the hoist to full height and inspect lift points for solid support.

Fig. 1 - Side Lift Points

WebFSM S1 LiftAndSupportPoints Fig1.png

Floor Jack

  1. Set the parking brake and block the wheels that are not being lifted.
  2. When lifting the rear of the car, put the manual gearshift lever into Reverse or automatic gearshift lever into Park.
  3. Raise the car high enough to insert the safety stands.
  4. Adjust and place the safety stands as shown in Fig. 4 so the car will be approximately level, then lower the car onto them.

Fig. 2 - Front Lift Point

WebFSM S1 LiftAndSupportPoints Fig2.png

Fig. 3 - Rear Lift Point

WebFSM S1 LiftAndSupportPoints Fig3.png

Fig. 4 - Safety Stands

WebFSM S1 LiftAndSupportPoints Fig4.png

FSM Source Pages

01-009 - Lift And Support Points: Lift
01-010 - Lift And Support Points: Floor Jack
01-011 - Lift And Support Points: Safety Stands

Forum Link Code

Copy this code and paste it in your post on the forum to create a link to this page.

[URL=http://acuralegendwiki.org/index.php/G2:_Service_Manuals_And_TSBs:_Web_Manual:_FSM:_Section_1:_Lift_And_Support_Points]LegendWiki - G2: Service Manuals And TSBs: Web Manual: FSM: Section 1: Lift And Support Points[/URL]

Links

Back To G2: Service Manuals and TSBs: FSM-LG9195
Back To G2: Service Manuals and TSBs
Back To Main Page

Personal tools